有耗介质层上多导体传输线的电磁耦合时域分析方法

目前,针对空间电磁场作用有耗介质层上传输线的电磁耦合,仍缺乏有效的数值分析方法.因此,本文提出一种高效的时域混合算法,很好地解决了有耗介质层上传输线电磁耦合建模难的问题.首先,对经典传输线方程进行改进,推导了适用于有耗介质层上多导体传输线电磁耦合分析的修正传输线方程.然后,结合时域有限差分方法和相应插值技术,求解修正传输线方程,获得多导线及其端接负载上的电压和电流响应,并实现空间电磁场辐射与多导线瞬态响应的同步计算.最后,通过相应计算实例的数值模拟,与CST软件的仿真结果进行对比,验证了时域混合算法的正确性和高效性.     

LC–DAD/ESI–MS/MS characterization of phenolic constituents in Rosa canina L. and its protective effect in cells

In an aim to prove the efficiency of polyphenols of Rosa canina fruits in promoting human health. A methanolic extract of R. canina fruits was prepared by successive maceration with solvents of increasing polarity. The polyphenol composition was analyzed by HPLC–DAD–ESI–MS. The biological activity of this extract on SH-SY5Y cells and HepG2 cells was then studied. The antioxidant activity was tested by various in vitro tests such as DPPH-radical-scavenging activity, FRAP assay, hydroxyl radical scavenging assay and total antioxidant capacity. The subacute toxicity of R. canina was tested on female rats by repeated intraperitoneal administration of various doses. The phenolic profiles showed 25 antioxidants distributed into three classes of phenolic compounds: glycosylated and agglomerated flavonoids/isoflavonoids, tannins and phenanthrenes. Qualitative phytochemical analyses showed that this extract lacks alkaloids. The methanolic extract of R. canina fruits has a total antioxidant capacity of 82.69 ± 1.18 μg EAA/mg of methanol extract and the IC₅₀ of the methods used is in the following increasing order: FRAP assay (61.88 μg/ml), then hydroxyl radical scavenging assay (67.45 μg/ml) and then DPPH radical-scavenging activity (129.81 μg/ml). The extract of R. canina did not cause any phenotypic signs of toxicity or mortality during and after treatment. The LD₅₀ was >5,000 mg/kg, hence, R. canina was considered nontoxic. An in vivo study proved the protective effect of R. canina against cardiac and hepato-renal toxicities. These results drew the importance of a healthy diet, where diets rich in R. canina fruits can be used as a rich natural source of antioxidants and anticarcinogenic phenolic compounds.     

13C NMR investigations of molecular order of rod-like,bent-core,and thiophene mesogens

In this review, methods to obtain the orientational order of topologically variant molecular mesogens using by one- and two-dimensional (2D) solid-state ¹³C nuclear magnetic resonance (NMR) spectroscopy are described. Besides ¹³C chemical shifts, the ¹³C─¹H dipolar couplings measured from 2D-separated local field (SLF) technique are used for computing the order parameters of a variety of mesogens. The investigated molecules are composed of a variable number of rings in the core, that is, core ranging from simply one ring to five rings. Among the mesogens investigated, a special focus has been placed on mesogens with thiophene rings, which are gaining popularity as liquid crystalline organic semiconductors. The replacement of a phenyl ring by thiophene in the core has a dramatic influence on molecular topology, as observed from the measured order parameters. The review highlights the advantages of the 2D SLF method for understanding the local dynamics and for mapping the topology of mesogens through the measured order parameters. SLF NMR studies of as many as 24 molecular mesogens that vary in terms of the molecular structure as well as topology are covered in the review. Order parameters of the rings have been estimated from the ¹³C─¹H dipolar couplings in the nematic, smectic A, smectic C, and tilted hexatic phases as well as in B₁ and B₂ mesophases of various mesogens. It is anticipated that, in the years to come, the 2D SLF method would provide advanced molecular information on structurally complex mesogens that are emerging in liquid crystal science through the incessant efforts of synthetic chemists. The mini review covers the orientational order of topologically variant molecular mesogens determined by 1D and 2D solid-state ¹³C NMR spectroscopy. Accordingly, rod-like, bent-core, and thiophene mesogens were subjected to 2D SLF measurements to get the order parameters from which the topology was established. The replacement of phenyl ring by thiophene and its influence on order parameters as well as on molecular topology is also discussed.     

无绝缘高温超导双饼线圈的瞬态电热特性分析

无绝缘高温超导线圈具有良好的电热稳定性和机械紧凑性,但其充电过程中却有明显的磁场延迟现象。为详细了解无绝缘高温超导线圈励磁过程的瞬态特性,建立了无绝缘高温超导线圈的同轴圆环等效电路模型。通过绕制一个670匝的无绝缘高温超导双饼线圈,在液氮温度下进行不同充电速率的励磁实验,初步验证了等效电路模型的正确性。基于该模型,针对线圈励磁过程的充电和恒流阶段,仿真得到了线圈各匝的径向电流分布规律和电热损耗特性。     

Tightly coupled aeroelastic model implementation dedicated to fast aeroelastic tailoring optimisation of high aspect ratio composite wing

This paper presents the development of a code, called GEBTAero, dedicated to very flexible aircraft (VFA) aeroelasticity and especially the evaluation of aeroelastic tailoring effect on critical speeds. GEBTAero is an open source code consisting in a tightly coupling between a geometrically exact beam theory -and a finite state induced flow unsteady aerodynamic model, including an homogenisation tool. This model has been implemented in Fortran using GEBT code and optimised open source libraries with particular focus on computation speed. Besides a non linear transient dynamic simulation capacity, a particular focus is put on the fast critical speed computation strategy using a non-iterative modal approach about the geometrically non linear deformed shape of the wing with the computation of only a few aeroelastic modes. Computation speed and accuracy of this implementation is assessed using widely used aeroelastic test cases and compared successfully to other aeroelastic codes. Configurations using aeroelastic tailoring, which are the core target of this solver, are then evaluated numerically on a representative high aspect ratio anisotropic composite wing and a simple 2-ply composite laminates with both variable ply orientations. It illustrates the strong correlation between the structural bending/twisting coupling of an unbalanced composite laminates and its critical aeroelastic speed. It also shows the high sensitivity of ply orientation on the aeroelastic behaviour.     

航空导管弯曲试验的疲劳裂纹萌生寿命

飞行器液压导管受接头和卡箍等约束，在使用的振动环境中，会因弯曲应力而导致破裂，影响到飞行安全．本文对飞行器液压系统通用的不锈钢导管的裂纹萌生寿命进行了试验研究．首先在对8 mm、12 mm 无缺陷导管和含U 型缺口8 mm 导管的疲劳试验和有限元分析的基础上，得到了导管的最大拉应变-裂纹萌生寿命数据．然后采用基于强度极限和弹性模量估算法的Manson-Coffin 公式来预测导管裂纹萌生寿命．最后引入加载类型修正系数、表面质量修正系数、试样尺寸修正系数、应力集中敏感系数和有效应力集中系数，使修正后的公式对三种类型的导管均有较好的裂纹萌生寿命预测精度．     

超音速等离子体炬的磁流体动力学数值研究

针对设计的喉径2mm、工作电流为100A的拉瓦尔喷嘴,在二维轴对称模型的基础上,对超音速等离子体炬中的流动及其外部射流进行了数值模拟。通过在阳极喷嘴内部采用基于磁矢量势的磁流体动力学模型,避免了对磁感应强度的复杂积分计算,得到了喷嘴内部多场耦合的结果及外部射流的流动状态,分析了喷嘴内部电磁场对等离子体的加速作用及射流发展过程。结果显示,等离子体经历了亚音速→跨音速→超音速的发展过程,最终获得2.3 Ma的超音速射流。研究结果为超音速等离子体炬的工业应用提供了理论基础。     

On the low-temperature anomalies of specific heat in disordered carbon nanotubes

The low-temperature behavior of the specific heat in disordered nanotubes strongly depends on structure changes and is not explained by the phonon contribution. Expression for electronic specific heat is carried out taking into account the multiple elastic electron scattering on impurities and structural inhomogeneities of short-range order type. The calculated electronic specific heat depends on diameter of nanotube, concentration of impurities, parameters of short-range order (structural heterogeneity) and describes the peculiarities of low-temperature behavior of specific heat observed in disordered CNT.     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。